Editing Custom sequenced Pikmin music

<code>.jam</code> files are files used for custom music in ''Pikmin''. 
Below, you will see a somewhat complete guide of how to create a custom <code>.jam</code> file for ''Pikmin''.

== Guide ==

=== Tools ===

* Hex Editor of your choice, I use [https://mh-nexus.de/en/downloads.php?product=HxD HxDenu]
* Yoshi2's fork of [https://github.com/RenolY2/flaaffy flaaffy]

=== Instructions ===

# Download Yoshi2's fork of flaaffy to make a custom <code>.bms</code> file. After that is done, rename the file to whatever <code>.jam</code> you would like to replace. Make sure you change the file extension from <code>.bms</code> to <code>.jam</code>. 
# After that, in a hex editor, open <code>pikiseq.arc</code> and your custom <code>.jam</code> file. Copy and paste your <code>.jam</code> file and paste it at the end of <code>pikiseq.arc</code>. 
# After you have copied and pasted your <code>.jam</code> file into <code>pikiseq.arc</code>, open <code>pikiseq.hed</code> or search for the string <code>BARC</code> in the <code>main.dol</code> in your hex editor.

[[File:image0.png|300 px|]]

# Underneath the jam file you want to replace, there will be two strings you need to replace. In the first string, replace it with <code>0x00035900</code>. The next string will be the length of the file you want to replace, in hexadecimal. Note that this is NOT the length of playback of the song, but the length of the file, which you should be able to find in your hex editor.

After that, your custom music should play correctly! Please note that some instruments may not play.